Vi anvender cookies - ved at anvend denne side eller ved at lukke denne meddelelse accepterer du vores cookiepolitik. Læs mere
logo
logo
  • Send a message to our customer support

ALDEC 45 AT

36020-2

ALDEC 45 AT

36020-2
  • Reduces sludge volume, which cuts down on transport and disposal costs
  • Continuous operation
  • Compact, modular design saves space
  • Low installed power reduces electricity consumption

Beskrivelse

The ALDEC range of decanter centrifuges was developed with a focus on cost-efficiency, reliability and easy operation. The ALDEC design is used for sludge dewatering in a wide range of industrial wastewater treatment applications, as well as municipal wastewater treatment plants.

Tekniske detaljer

Sludge type
Raw Primary Sludge
Max. Noise level (dB)
< 85 dB
Regulation
Automatic
Max. Vibration level (mm/s)
<6 mm/s
Design
3652
Min. Washwater flow (m³/h)
6,5 m³/h
Cone angle
20
G-force
2830
Feed zone
2 Stellite Hairpieces
Conveyor
360º 6 Hairpieces CTg
Main motor starting
Star / delta starting, soft starter, or VFD
GearBox Ratio
1:159
Diff speed
2-18
Bowl material
AISI-304
Conveyor material
Lean Duplex
Lubrication
Grease
Casin material
AISI-304
Conveyor flights
AISI-316
Operation speed
3750
Controller type
N/A
Controller screen
N/A
Differential speed control
Pulley and Belt Mechanism as a differential speed adjustment device. The pulleys are interchangeable with the machine stopped. With overload protection device.
Slugde flow
Countercurrent
Liquid flow
Cuasiaxial
Seals
Nitrile
Frame
Carbon Steel Rolled Profile
Motor power supply
380/III
Main motor protection
IP 55
GearBox Type
Planetary Epicyclic
GearBox stages
2
Back drive (kW)
NA kW
Diameter (mm)
360 mm
Flow (m³/h)
13 m³/h
Installed Power (kW)
22 kW
Long bowl (mm)
1512 mm
Main motor (kW)
22 kW
Main motor speed (rpm)
3000 rpm
Mass load (kgMS/h)
200 kgMS/h
Spec. Power consumption (kW/m³)
1,3 kW/m³
Torque (kNm)
2,5 kNm
Vel. Max. (rpm)
4200 rpm
Washwater. Min. Head (bar)
3 bar

Dokumentation