Vi anvender cookies - ved at anvend denne side eller ved at lukke denne meddelelse accepterer du vores cookiepolitik. Læs mere
logo
logo
  • Send a message to our customer support

ALDEC 75 AT

44045-1

ALDEC 75 AT

44045-1
  • Reduces sludge volume, which cuts down on transport and disposal costs
  • Continuous operation
  • Compact, modular design saves space
  • Low installed power reduces electricity consumption

Beskrivelse

The ALDEC range of decanter centrifuges was developed with a focus on cost-efficiency, reliability and easy operation. The ALDEC design is used for sludge dewatering in a wide range of industrial wastewater treatment applications, as well as municipal wastewater treatment plants.

Tekniske detaljer

Sludge type
Digested
Max. Noise level (dB)
< 85 dB
Regulation
Automatic
Max. Vibration level (mm/s)
<6 mm/s
Design
4452
Min. Washwater flow (m³/h)
12,5 m³/h
Cone angle
20
G-force
3550
Feed zone
2 Stellite Hairpieces
Conveyor
360º 6 Hairpieces CTg
Main motor starting
Star / delta starting, soft starter, or VFD
GearBox Ratio
1:159
Diff speed
1-22
Bowl material
Lean Duplex
Conveyor material
AISI-316
Lubrication
Grease
Casin material
AISI-304
Conveyor flights
AISI-316
Operation speed
3800
Controller type
BASIC
Controller screen
7" HMI
Differential speed control
VFD controlled rear motor
Slugde flow
Countercurrent
Liquid flow
Cuasiaxial
Seals
Nitrile
Frame
Carbon Steel Rolled Profile
Motor power supply
380/III
Main motor protection
IP 55
GearBox Type
Planetary Epicyclic
GearBox stages
2
Back drive (kW)
11 kW
Diameter (mm)
440 mm
Flow (m³/h)
25 m³/h
Installed Power (kW)
36 kW
Long bowl (mm)
1760 mm
Main motor (kW)
30 kW
Main motor speed (rpm)
3000 rpm
Mass load (kgMS/h)
130 kgMS/h
Spec. Power consumption (kW/m³)
1,1 kW/m³
Torque (kNm)
4,5 kNm
Vel. Max. (rpm)
3800 rpm
Washwater. Min. Head (bar)
3 bar

Dokumentation